Includes all the features of the ECHO 9 plus “unlimited” reading Datalogger with export to excel, B-scan (2 GB removable micro SD card standard, other Micro SD cards up to 32GB are optional). Data XL interface program to export saved readings to p.c. (excel)
This option is only available combined with the Datalogger option. Provides a non-encoded (time base) or a cross section (side view) of the part being inspected. The A-scan and B-scan can now be view at the same time. The operator can scroll where the cursor line is after a B-scan is generated.
Requires hardware modification to either ECHO 9DLW or ECHO 9DL, uses EZ Scan 4 as a magnetic wheel, linear axis encoder.
The EZ Scan 4 combined with our ECHO 9DLW is the ultimate in easy to use, affordable magnetic wheel linear axis encoder for B-scan surveys with reports. The EZ Scan 4 sends a pulse to the gage to take a thickness reading while drawing the B-scan image based on one axis. The gage keeps track of the distance traveled (DT) so you can cross reference any wall thinning areas to the image displayed and saved into memory. To show A-scans and B-scans on the computer, you must purchase separately our Data XL Pro.
Displays trig functions for angular distance, surface and depth. Can use 2.25MHz, or 5 Mhz, in angles from 30-80 degrees. NOT TO BE USED AS A FLAW DETECTOR due to limited scan speed and vertical linearity requirements of most flaw detectors.
Hand-Held Digital Ultrasonic thickness gage with 3.5" Sunlight Readable Color Display for thickness only including: Echo to Echo Software, Plastic Carrying Case, 2 Oz. bottle of couplant (C-02G), Re-Chargeable Li. Ion batteries, Instruction manual and DKS537, 5MHz, .375 " diameter Transducer with potted cable, Charger adapter with usb cable and data xl interface program
The DHT-537 high temperature dual (up to 950F intermittent use) shown with optional Bell Housing and available armored Dual Lemo to Microdoct 6’ cable with molded plug (DLM-09ACMP)
Echo to Echo to ignore Coatings
This option allows for the coating or paint thickness to be ignored. The coating thickness or paint does not add any structural integrity to the base material. Without the ability to subtract the paint, the normal measurement would introduce an error of 2 to 2.5 times the thickness of the paint, which represents the sound speed difference from Paint to Steel. In addition it is expensive and time consuming to grind out the coating thickness and to re-apply a coating.
The ECHO 9 Datalogger stores millions of readings in itâ€™s Datalogger with removable sd card memory as linear, 2D, 3D or boiler in alpha numeric or thousands of waveforms (if gage is equipped with waveform option). Thickness values along with the i.d. information and all gage set up parameters are exported to Microsoft excel via the no-charged, included Data XL interface program provided with every Danatronics thickness gage. Our Datalogger also interfaces with Ultrapipe. Please contact Danatronics for more details.
The live waveform (A-scan) is used to verify reading stability. With the live waveform the operator can adjust gain, range, rectification and 2 forms of blanking to set the gage to ignore unwanted noise or mode converted echoes.
Spring Loaded Holder
Danatronics Spring Loaded Holder has dual v-notches for small diameter pipes and tubes to prevent probe “rocking”
Combines all the features such as Hand-Held Digital Ultrasonic thickness gage with live Color Waveform, “unlimited” thickness readings via internal Datalogger with removable micro sd card including: Plastic Carrying Case (PC-09) , 2 Oz. bottle of couplant (C-02G), Re-chargable Li Ion Battery, Instruction manual and DKS537, 5MHz, .375 " diameter Transducer with potted cable, Echo to Echo, and B-Scan, A Custom Rubber boot with built in bail and 4 point chest harness, Charger adapter with usb cable and Data XL interface program to export saved readings to p.c. (excel). The ECHO 9DLW also includes the ability to display the thickness of the coating and the substrate thicknesses at the same time as well as the ability to calibrate on their individual sound velocities.
Includes all the features of the ECHO 9 plus a live color waveform (A-scan). (No Datalogger) with the live waveform, you can adjust range, gain, blanks and rectification. ECHO 9W also includes the ability to display the thickness of the coating and the substrate thicknesses at the same time as well as the ability to calibrate on their individual sound velocities.
A fully integrated, portable solution
All ECHO 9 Options are field upgradeable via the keypad. Danatronics offers a unique and convenient way to upgrade your gages. The upgrades are done directly from your gage and do not require the use of a computer. The advantages of field upgradability are:
Hand-Held Digital Ultrasonic thickness gage with 3.5" Sunlight Readable Color Display for thickness only including: Echo to Echo Software, Plastic Carrying Case, 2 Oz. bottle of couplant (C-02G), Re-Chargeable Li. Ion batteries, Instruction manual and DKS537 , 5MHz, .375 " diameter Transducer with potted cable, Charger adapter with usb cable and data xl interface program
Danatronics offers our newest ultrasonic thickness gage line, the ECHO 9 series. ECHO 9 represents our most advanced thickness gage ever. ECHO 9 offers a 3.5” high resolution sunlight readable color display with live A-Scan, echo to echo to ignore coatings, B-Scan, datalogger with up to 32GB of SD card memory and interface to Microsoft excel. The ECHO 9 is available in 4 models including the ECHO 9, ECHO 9DL, ECHO 9W and ECHO 9DLW. The vibrate on alarm feature is the world’s first and is great for loud environments
ECHO 9 Transducers
Danatronics offers a wide variety of dual transducers from .5-10 Mhz , high temperature duals and delay lines including pencil probes (12 Mhz.) for special applications. Consult Danatronics or one of our authorized representative for the proper use and recommendation for your application.