EK - 3000

Spectroline

También te puede interesar:

PM-1600BL

The PM-1600BL is equipped with a black light filter that reduces the output of wavelengths longer than 400 nm. It provides a nominal steady-state UV-A intensity of 4,000 μW/cm2 (maximum) at 15 inches (38 cm).

PowerMAX™ 365 Series flood lamps feature a panel of 16 powerful UV-A (365 nm) LEDs specially engineered for non-destructive testing applications. These versatile, stationary light sources can be installed overhead or in-line, and can be ganged together to provide an even wider coverage area.
 
Available in four models to meet your specific inspection needs: high-intensity and standard intensity versions, each with or without a black light filter. Ideal for NDT inspection booths, fluorescent penetrant and magnetic particle inspection, screening of fluorescent particles, wash station inspection and many other applications requiring maximum uniformity of UV-A coverage over a large area.


Easily Expandable!

TRITAN™ 365

Ultra-High Intensity UV-A Lamp

Spectroline

OLX-365

Features:

  • Choice of two high-intensity models with a nominal steady-state UV-A intensity as high as 8,000 μW/cm2 or two standard-intensity models with a maximum UV-A intensity of 4,500 μW/cm2 at 15 inches (38 cm)
  • Large coverage area of 15 inches by 6 inches (38 cm x 15 cm), with a minimum UV-A intensity of 2,000 μW/cm2
  • Low visible light emission – less than 2 foot-candles (22 lux)
  • Easily mountable for overhead inspection or in-line applications
  • Built-in fans keep LEDs cool to maintain optimum light output during extended use
  • Meets ASTM UV-A intensity and wavelength specifications for FPI and MPI
  • Customizable! Multiple lamp units can be “ganged” together longitudinally or back-to-back for a larger coverage area to meet your specific inspection requirements
  • Both high- and standard-intensity versions available with or without black light filter
  • Standard-intensity lamps meet ASTM UV-A intensity and wavelength specifications for FPI and MPI, and come with acertificate of compliance for both wavelength and output measurements

Two High-Standard Models​​

PowerMAX™ 365 Series UV-A LED panel flood lamps are also available in two standard-intensity models that are designed for NDT inspection applications requiring limited UV-A output. Both versions address aerospace industry concerns.

PM-1600UVH

The PM-1600UVH is equipped with a clear glass filter and provides a nominal steady-state UV-A intensity of 8,000 μW/cm2at 15 inches (38 cm).

PM-1600 BLH

The PM-1600 BLH is equipped with a black light filter that reduces the output of wavelengths longer than 400 nm. It provides a nominal steady-state UV-A intensity of  6,500 μW/cm2 at 15 inches (38 cm).

Two High-Intensity Models​​

PowerMAX™ 365 Series UV-A LED panel flood lamps are available in two high-intensity models that are specifically designed for NDT inspection applications requiring high UV-A output.

PM-1600UV

The PM-1600UV is equipped with a clear glass filter and provides a nominal steady-state UV-A intensity of 4,500 μW/cm2(maximum) at 15 inches (38 cm).